My ASUS Vivobook X202E is an excellent little machine – I really appreciate it’s compact form factor, good keyboard and bright multitouch screen. However, with the slow HDD, display driver and processor it has also its clear limitations. There is not much I can do with the processor or display driver – the reality is that as more and more of people will adopt laptop computers as their primary home PCs, rather than desktop ones, the fixability and maintainability of ICT keeps going down. However, I wanted to try upgrading the HDD into a SSD, since there was evidence online that this could be done.
The first choice concerned identifying the right Solid State Drive to fit the purpose. Samsung’s 840 EVO series was finally an obvious choice, since it was 7 mm thin, so it did fit physically, it was rather fast, and also optimized in terms of power efficiency, so that it did suit the purpose as a laptop upgrade. I picked the 250 GB version, while being tempted also with the 500 GB one; I did consider the cost, however, still being prohibitive in the larger model. Smaller than 250 GB on the other hand did not make sense in terms of fitting in my OS, applications and the necessary working documents.
The first steps involved re-partitioning the original HDD so that it could be cloned to the SSD. I removed all data that I could later sync from our home server or from the cloud services, deleted the data partition entirely, and tried moving the recovery partition to the middle of the disk. I installed and used the free version of “EaseUS Partition Master” (be careful to deselect all freebie crapware options during its installation, though). As to the actual data or disk cloning, Samsung EVO SSD comes with the necessary SATA-USB3 adapter cable and “Samsung Data Migration” software that seemed to do it job (I have not yet tested the recovery partition, though, so I am not sure whether it made through the cloning). But the new SSD disk boots, it is recognized automatically by the UEFI (Windows 8 BIOS system), and the Windows as well as Office 2013 installations still authenticate as legitimate.
If your goal is not to clone the old system with its Windows 8 Starter Edition, but rather to install another, more featured OS, Linux, OS X or some multiboot setup, then I recommend doing some further research before going ahead with the SSD operation. People have had mixed success and you need to start by disabling UEFI, disabling “Secure Boot”, then enabling “Legacy Boot” in the BIOS. I am also not sure whether e.g. Linux will have all the drivers to get the touchscreen, touchpad, hotkeys and all the other features working as intented – but I am interested to hear about the experiments in those directions.
As to the actual physical part of opening the Vivobook, removing the old HDD and installing the SSD, there is a good visual guide by Neil Berman here: http://www.durhamcomputerservices.com/theonbutton-blog/asus-vivobook-x202e-s200e-q200e-ssd-hard-drive-upgrade.html
After putting everything back in, the reboot will kick Windows into a prolonged startup phase during which it will apparently install some SSD related drivers or settings. I did also install and run the “Samsung Magician” tool, which claims to provide various optimization options for running the Windows OS over a SSD.
The actual speed gain is noticeable, and the relevant figure in the Windows experience index showed the rise from c. 5 to over 8 when tests were re-run after the SSD installation. But this will not of course magically trasform the 500 euro budget laptop into a 1500 euro ultrabook. The slow processor, bit clumsy form factor, lack of keyboard backlight – all those issues still remain. But the upgrade will definitely make the Vivobook more usable and responsive, which was the main goal at least in my case.
You must be logged in to post a comment.